veneer slicer, surface planer, super surfacer, knife grinder, veneer dryer

	175-1 Marikoshinden, Suruga-Ku,　J421-0111 Shizuoka, Japan　TEL +81-54-259-8111 FAX +81-54-257-0498

ＨＯＭＥ Knife grinder Semi-Automatic Full Automatic   For Throw-away knives   For Slicer Knives

"Golden Lapper" GX-50L Specification Max.knife length : 500 mm Grinding motor : 0.75 Kw Lapping motor : 0.2 Kw Feed motor : 0.1 Kw Pump : 40 w Feed speed : 9.3 m/min. (50Hz) Net Weight : 460 Kgs Feature All griding procedures, from rough grinding until finish lapping, can be done just push the start button, fully automatic !(micro computer controlled) The number of grinding (lapping) times, indexing amount, smoothing amount etc. according to the condition of the knife can be set easily on the panel switch. Magnetic chuck bed (option) available. A special type for grinding both of cemented carbide knives and high speed steel knife is available as an option.(equipped with feed motor inveter, high speed lapping motor for diamond wheel )

"Golden Lapper" GX-70L Specification Max.knife length : 700 mm Grinding motor : 0.75 Kw Lapping motor : 0.2 Kw Feed motor : 0.2 Kw Pump : 40 w Feed speed : 9.3 m/min. (50Hz) Net Weight : 600 Kgs Feature All griding procedures, from rough grinding until finish lapping, can be done just push the start button, fully automatic !(micro computer controlled) The number of grinding and lapping times, indexing amount, smoothing amount etc. according to the condition of the knife can be set easily on the panel switch. Magnetic chuck bed (option) available. A special type for grinding both of cemented carbide knives and high speed steel knife is available as an option.(equipped with feed motor inveter, high speed lapping motor for diamond wheel )

GX-100L Specification Max.knife length : 1,000 mm With magnetic chuck bed Grinding motor : 0.75 Kw Lapping motor : 0.2 Kw Feed motor : 0.2 Kw Pump : 40 w Feed speed : 9.3 m/min. (50Hz) Net Weight : 1,250 Kgs Feature All griding procedures, from rough grinding until finish lapping, can be done just push the start button, fully automatic !(micro computer controlled) The number of grinding and lapping times, indexing amount, smoothing amount etc. according to the condition of the knife can be set easily on the panel switch.

ML-80G / ML-100G  ~T.C.T. knives ~ Specification Max.knife length : 800 mm (ML-80G), 1,000 mm (ML-100G) Grinding motor (wheel):1.5 Kw Grinding motor (diamond cup) : 1 Kw Lapping motor (diamond cup) : 0.75 Kw Feed motor : 0.4 Kw with inverter Head elevation motor : 25 w with inverter x 3 Pump : 0.1 Kw Feed speed : 2 ~ 15 m/min. (50Hz) Net Weight : 1,600 Kgs (ML-80G) , 1,800 Kgs (ML-100G) Feature Three(3) procedures ~ grinding base metal by the grinding wheel, T.C.T part by rough diamond cup + lapping diamond cup ~ are performed fully automatic with high efficiency. A clutch brake is employed on the diamond cup motors for eliminating vibration during grinding operation. A rigid construction body with linear guide rail keeps high grinding accuracy for long time. Operation mode, for example,<grinding of base metal with T.C.T>, or< All T.C> , or< H.S.S knives > etc. can be set easily by LCD touch-panel switch.

Copyright© 2007 Marunaka Tekkosho Inc., All Rights Reserved.